Constant top performance

• Newest generation brushless motor with high luminosity LED light
• Electronic control with accurate adjustment of speed and torque up to 40,000 rpm and 80 Ncm
• Extended service life of parts that require autoclave sterilization: motor, cable and connector.
  New special motor protection for sterilization.

Immediate use and practicality

• New practical peristaltic pump: fast tube replacement and efficiency
• Easy touch keyboard and wide display
• Multifunction foot-control with accurate variable speed pedal, reverse, irrigation pump, programs change.

Accessory:

C20L 

Optic contra-angle for led motors, 20:1 reduction, external and internal irrigation.
Top reliability and high torque.

SSI is the optimal solution for immediate implantation and immediate loading. The SSI dental implant has exceptional self-drilling capabilities and a unique spiral body design which enables it to change its position during placement and obtain very high primary stability even in very complicated clinical cases.

	1 Micron level (microgap) between the implant platform and the abutment is kept to an absolute minimum.
	Rough surface on the top. Threads reaching the top of the implant. Advantage: Decreasing the crestal stress
	Tapered body and code. V Shape Body Design. Advantage: Very Easy Implant Insertion.
	Expanding tapered implant body with double-thread self tapping design condenses bone gradually to enhance primary stability.
	Rounded apex improves the ease of insertion and allowing mild direction refinement during the initial stages of insertion

Drilling Protocol

Drill sequence by bone type -
An additional 1 mm must be added to the length of the drill to account for the angled cutting tip.

D-I, D-II Dense bone considerations -
Countersink should be used if the standard dense bone protocol is not sufficient to fully seat the implant without exceeding the recommended maximum insertion torque of max. 60Ncm for implant Ø3.75mm and above. Do not exceed max. 45Ncm for implants diameter lower than 3.75mm.