About the motor:

As one of the engines of the representative labs, Multi 600 sets a new standard that the other companies are trying to reach.
Smooth speed control manually or with knee (1000 to 50,000 rpm), easy-to-read digital LCD monitor, high power of 7.8Ncm / 250W, and minimal operating noise, make it the ultimate tool for on-site lab or dental practice.

It also has a self-diagnostic function that allows immediate fault detection and an automatic voltage protection system.

The Multi 600 doesn't heat up even after many hours of use, ease of use and work accuracy that you have not yet known.

FDA Approved

SSI is the optimal solution for immediate implantation and immediate loading. The SSI dental implant has exceptional self-drilling capabilities and a unique spiral body design which enables it to change its position during placement and obtain very high primary stability even in very complicated clinical cases.

	1 Micron level (microgap) between the implant platform and the abutment is kept to an absolute minimum.
	Rough surface on the top. Threads reaching the top of the implant. Advantage: Decreasing the crestal stress
	Tapered body and code. V Shape Body Design. Advantage: Very Easy Implant Insertion.
	Expanding tapered implant body with double-thread self tapping design condenses bone gradually to enhance primary stability.
	Rounded apex improves the ease of insertion and allowing mild direction refinement during the initial stages of insertion

Drilling Protocol

Drill sequence by bone type -
An additional 1 mm must be added to the length of the drill to account for the angled cutting tip.

D-I, D-II Dense bone considerations -
Countersink should be used if the standard dense bone protocol is not sufficient to fully seat the implant without exceeding the recommended maximum insertion torque of max. 60Ncm for implant Ø3.75mm and above. Do not exceed max. 45Ncm for implants diameter lower than 3.75mm.